1. GERSTEL TSPS란?
GERSTEL TSPS(Thermal Separation & Pyrolysis System)는 독일의 분석장비 전문기업인 GERSTEL이 개발한 고급 시료 전처리 시스템으로, GC-MS(가스크로마토그래피-질량분석기)와 연결하여 사용합니다.
쉽게 말하면,
- 열탈착(Thermal Desorption)
- 열추출(Thermal Extraction)
- 열분해(Pyrolysis)
를 이용해 시료 속 유기성분(VOC, SVOC, 고분자 분해물 등)을 분석하는 장비입니다.
2. 주요 사용처
환경 분석
대기 및 실내공기 중
- VOC
- SVOC
- 악취물질
- 유해가스
분석에 사용됩니다.
자동차 산업
자동차 내장재에서 발생하는
- 포름알데히드
- 벤젠
- 톨루엔
- 휘발성 유기화합물
분석에 사용됩니다.
플라스틱 및 고분자 분석
- PE
- PP
- PVC
- ABS
- PET
등의 고분자를 열분해하여 조성 분석을 수행합니다.
마이크로플라스틱 분석
환경 중 미세플라스틱의 종류와 조성을 확인할 수 있습니다.
식품 및 향료 산업
- 향기 성분
- 식품 향미
- 오염물질
분석에 활용됩니다.
법과학(Forensic)
- 화재 원인 조사
- 페인트 분석
- 섬유 분석
- 플라스틱 증거물 분석
등에 활용됩니다.
3. 주요 기능
열탈착(Thermal Desorption)
흡착관(TD Tube)에 포집된 시료를 가열하여 휘발성 성분을 GC-MS로 전달합니다.
특징
- 용매 사용 없음
- 극미량 분석 가능
- VOC 분석 최적화
열추출(Thermal Extraction)
고체나 액체 시료를 직접 가열하여 휘발성 물질만 추출합니다.
예)
- 플라스틱
- 고무
- 접착제
- 전자부품
열분해(Pyrolysis)
시료를 최대 1000℃까지 순간 가열하여 분해 생성물을 GC-MS로 분석합니다.
특히
- 고분자
- 수지
- 페인트
- 복합재료
분석에 강력합니다.
자동 시료 주입
GERSTEL MPS Autosampler와 연결 시
- 최대 120개 시료
- 무인 자동 분석
가능합니다.
4. 성능
| 항목 | 성능 |
|---|---|
| 열분해 온도 | 최대 1000℃ |
| 승온속도 | 최대 100℃/sec |
| 시료 자동화 | 최대 120 샘플 |
| 분석대상 | VOC, SVOC, 고분자 |
| 분석장비 연동 | GC, GC-MS |
| 소프트웨어 | MAESTRO |
5. 장비 효과
품질관리 향상
제품에서 발생하는 휘발성 물질을 빠르게 검출합니다.
분석시간 단축
자동화 분석으로 야간 무인 운전이 가능합니다.
극미량 검출
ppb 수준의 VOC 분석이 가능합니다.
미지 시료 분석
고분자나 오염물질의 정체를 파악하는 데 매우 유리합니다.
용매 절감
유기용매 사용이 거의 필요 없습니다.
6. 사용 방법 (기본)
VOC 분석
① 흡착관(TD Tube)에 공기 시료 채취
② TSPS 장비에 장착
③ 열탈착 실시
④ GC-MS 분석
⑤ 결과 해석
플라스틱 분석
① 시료 0.1~1mg 채취
② 열분해 튜브 삽입
③ 600~1000℃ 열분해
④ 생성물 GC-MS 분석
⑤ 고분자 종류 판별
7. 신품 가격
TSPS는 옵션 구성이 다양하여 가격 차이가 매우 큽니다.
구성 예시
- TDU
- PYRO Module
- MPS Autosampler
- CIS
- MAESTRO Software
포함 여부에 따라 달라집니다.
대략적인 신품 가격
| 구성 | 가격 |
|---|---|
| 기본 열탈착 시스템 | 약 4천~7만 USD |
| 열탈착 + 자동주입 | 약 6천~10만 USD |
| 풀옵션 TSPS | 약 10만~20만 USD 이상 |
(한화 약 5천만~2억8천만원 수준)
시장 구성에 따라 달라질 수 있습니다.
8. 2026년 중고 시세
GERSTEL 장비는 GC-MS 부속장비 중에서도 중고가 방어가 좋은 편입니다.
| 상태 | 예상 시세 |
|---|---|
| 부품용 | 200만~500만원 |
| 기본 작동 | 500만~1500만원 |
| TDU 포함 정상장비 | 1500만~3000만원 |
| PYRO 포함 | 2500만~5000만원 |
| MPS 자동주입 포함 | 4000만~8000만원 |
| 풀옵션 교정완료 | 7000만~1억2000만원 |
중고가격을 결정하는 핵심 요소
- MPS Autosampler 포함 여부
- PYRO 모듈 포함 여부
- CIS 냉각장치 상태
- MAESTRO 라이선스 유무
- GC-MS 연결 케이블 완비 여부
- 최근 PM(예방정비) 이력
- Agilent GC-MS 호환 여부
종합 평가
| 항목 | 평가 |
|---|---|
| 분석성능 | ★★★★★ |
| 자동화 | ★★★★★ |
| 활용성 | ★★★★★ |
| 유지비 | ★★★☆☆ |
| 중고가치 | ★★★★★ |
GERSTEL TSPS는 단순한 열탈착 장비가 아니라 VOC 분석, 플라스틱 분석, 미세플라스틱 분석, 자동차 내장재 방출가스 시험, 고분자 연구까지 가능한 고급 GC-MS 전처리 플랫폼입니다. 특히 Agilent Technologies GC/MS와 함께 사용되는 경우가 많으며, 환경·화학·재료 분야 연구소에서 여전히 높은 가치를 인정받고 있습니다.
1. What is GERSTEL TSPS?
GERSTEL TSPS (Thermal Separation & Pyrolysis System) is an advanced sample pretreatment system developed by GERSTEL, a German company specializing in analytical equipment. It is used in conjunction with GC-MS (Gas Chromatography-Mass Spectrometer).
Simply put, it is a device that analyzes organic components (VOCs, SVOCs, polymer degradation products, etc.) within samples using:
Thermal Desorption
Thermal Extraction
Pyrolysis
It is used for analyzing organic components in samples (VOCs, SVOCs, polymer degradation products, etc.) in atmospheric and indoor air.
Automotive Industry
It is used for analyzing volatile organic compounds (VOCs), benzene, toluene, and other substances emitted from automotive interior materials.
Plastic and Polymer Analysis
Composition analysis is performed by thermally decomposing polymers such as PE, PP, PVC, ABS, and PET.
Microplastic Analysis
The types and composition of microplastics in the environment can be identified.
Food and Flavor Industry
Utilized for the analysis of fragrance components, food flavors, and contaminants.
Forensic Science
Utilized for fire cause investigation, paint analysis, fiber analysis, plastic evidence analysis, etc.
3. Key Functions
Thermal Desorption
Heats the sample collected in the adsorption tube (TD Tube) to transfer volatile components to the GC-MS.
Features
No solvent use
Capable of ultra-trace analysis
Optimized for VOC analysis
Thermal Extraction
Extracts only volatile substances by directly heating solid or liquid samples. Examples)
Plastics
Rubber
Adhesives
Electronic Components
Pyrolysis
Instantly heats samples up to 1000°C to analyze decomposition products using GC-MS.
Especially powerful for the analysis of
Polymers
Resin
Paints
Composite Materials
Automatic Sample Injection
When connected to the GERSTEL MPS Autosampler
Up to 120 samples
Unmanned automatic analysis Improved
4. Performance
Item Performance
Pyrolysis Temperature: Up to 1000°C
Heating Rate: Up to 100°C/sec
Sample Automation: Up to 120 samples
Analysis Targets: VOC, SVOC, Polymers
Analysis Equipment Integration: GC, GC-MS
Software: MAESTRO
5. Equipment Benefits
Improved Quality Control
Rapidly detects volatile substances emitted from products.
Reduced Analysis Time
Automated analysis enables unmanned nighttime operation.
Trace Detection
Analysis of VOCs at the ppb level is possible.
Analysis of Unknown Samples
Highly advantageous for identifying the nature of polymers or contaminants.
Solvent Savings
Almost no organic solvents are required.
6. Usage Method (Basic)
VOC Analysis
① Collect air samples in the adsorption tube (TD Tube)
② Mount onto the TSPS equipment
③ Perform thermal desorption
④ GC-MS analysis
⑤ Interpret results
Plastic Analysis
① Collect 0.1–1 mg of sample
② Insert pyrolysis tube
③ Pyrolysis at 600–1000°C
④ GC-MS analysis of products
⑤ Identification of polymer types
7. New Product Price
TSPS has a wide variety of option configurations, resulting in significant price differences.
Configuration Examples
TDU
PYRO Module
MPS Autosampler
CIS
MAESTRO Software
Prices vary depending on inclusion. Approx. New Price
Configuration Price
Basic Thermal Desorption System approx. 40 million–70,000 USD
Thermal Desorption + Automatic Injection approx. 60 million–100,000 USD
Full-option TSPS approx. 100,000–200,000 USD or more
(Approx. 50 million–280 million KRW)
Prices may vary depending on market conditions.
8. Used Market Prices in 2026
GERSTEL equipment tends to hold its value well in the used market, even among GC-MS accessories.
Estimated Market Price (Based on Condition)
For parts: 2 million–5 million KRW
Basic operation: 5 million–15 million KRW
Normal equipment including TDU: 15 million–30 million KRW
Including PYRO: 25 million–50 million KRW
Including MPS automatic injection: 40 million–80 million KRW
Full option, fully calibrated: 70 million–120 million KRW
Key factors determining used price
Inclusion of MPS Autosampler
Inclusion of PYRO module
Condition of CIS cooling system
Presence of MAESTRO license
Completion of GC-MS connection cables
Recent PM (Preventive Maintenance) history
Agilent GC-MS compatibility
Overall Evaluation
Item Evaluation
Analytical Performance ★★★★★
Automation ★★★★★
Usability ★★★★★
Maintenance Costs ★★★☆☆
Used Value ★★★★★
GERSTEL TSPS is not just a simple thermal desorption device, but also for VOC analysis, plastic analysis, It is an advanced GC-MS pretreatment platform capable of microplastic analysis, testing of automotive interior emissions, and polymer research. It is frequently used in conjunction with Agilent Technologies GC/MS and continues to be highly valued by laboratories in the environmental, chemical, and materials science fields.
댓글 없음:
댓글 쓰기